decks.co.uk

Description :

The crossfader is at the very heart of the DJing experience. So why do so many mixers come with faders that feel like an afterthought? The feel of the crossfader is as important as any other feature of your mixer, so you deserve to have the best at your fingertips.

The Audio Innovate innoFADER has been designed to completely change the way you feel about the crossfader. Having studied the habits and requirements of today’s DJs, the innoFADER offers unparalleled levels of quality and adjustability that you just don’t find in other crossfaders.

So thanks to the innoFADER, you'll no longer need to be less than satisfied with the stock fader in your mixer. Buy the innoFADER today and change your DJ life forever.

Wouldn't you rather have a fader that you just plug in and forget about? Isn't it a real pain to have to keep taking it out every few months to clean it, just so it continues to work? Such is the weakness of traditional faders - contact technology that will eventually break.

The innoFADER has been built from the ground up to utilise a new form of non-contact technology - capacitance. For you, this means installing and forgetting about it, rather than constant faceplate removing sessions to remove the build up of daily DJ dirt.

That's not all - the innoFADER has a whole arsenal of adjustments as well as an almost universal plug and play architecture, making it the most user friendly fader in the DJ scene.

The success of a mixer is largely down to the feel of the crossfader. It’s a highly personal experience that is often ignored with stock faders. You need to make it your own and feel that the fader won’t break in your hands.

The innoFADER comes complete with a solid steel 8mm fader stem, designed to withstand even that hardest battering from a heavy handed scratch DJ. But thanks to specially designed polished Steel rails, the innoFADER runs as smooth as butter, responding to even the lightest touch.

But that’s not all - if you prefer a little more resistance from your fader, the innoFADER has a special tension adjust control. It's also been designed so that the tension adjust screw stays in place - no working its way free inside your fader.

Features :

No bleed/cracking
Even the best conductive plastic (CP) or carbonized conductive plastic (CCP) contact faders will eventually bleed and require cleaning. Since the InnoFader is non-contact, no cleaning is required.

Sturdy design - 8mm stem, long body type
Many DJs have experienced issues with bent or broken 4mm fader stems, thus the InnoFader adopts the emerging standard 8mm stem, ensuring almost no chance of breaking the stem. The long body type ensure a rigid construction which when combined with the heavy stem ensures a solid and long lasting crossfader.

No calibration required
The InnoFader is designed to automatically compensate for circuit tolerances to the point that no calibration is required to adjust for the <0.5mm tolerance on fader cut-in position.

Standard VCA output
Many manufacturers design their faders to work with custom outputs, and interfaces that make plug and play with 3rd party faders almost impossible. The InnoFader will work as a drop in replacement for analog faders. Why?

1. The pinout is a 4 pin industry standard +Vin, VCA out #1, VCA out #2, and ground. 2. The VCA out signals are from 50k digital potentiometers with 256 taps, and the output can short to Vcc or ground for a full on/off signal. 3. The entire fader power draw can be as low as 0.5mA so that circuits designed for low power 50k fader connections will work.

Ultra wide range tension adjustment
At the lightest setting, the InnoFader can move with the slightest tap. On the other extreme, the InnoFader requires a steady push to move it. DJs can adjust the InnoFader to any tension setting depending on mixing style.

Adjustable curve
Analog VCA faders have fixed A, B, or D-type curves. The InnoFader has an output curve adjustment to fit any of these configurations. In addition to fitting these configurations, the InnoFader can be set for full cutting at the top or bottom.

Single cut-in adjustment for both sides
This ensures that the InnoFader can work in any sized fader slot. Since the adjustment is electronic, the actual active fader area can be shortened, unlike others which have a fixed active fader area. This often requires adjusting the mixer to fit the fader, while the InnoFader can be electronically adjusted to fit the mixer.

Not affected by dust, smoke, temperature, moisture
One main drawback of optical faders is that they stop working once there is internal dirt buildup. The InnoFader´s electronic signals are unaffected by environmental factors experienced in harsh DJ environments.

No cleaning required
Unlike other contact fader technologies, only routine light maintenance is required to keep the rails lubricated and free running. Because of the closed construction of the long body, this is kept to an absolute minimum.

Compatibility :

Allen & Heath Xone:02

Allen & Heath Xone:32,62,92

Audio Innovate AEM-100/I

Behringer DX-052

Citronic SM FX500

Denon X-500, X-900

Denon X-1500

Ecler HAK/NUO/EVO "Eternal"

Ecler HAK/NUO/EVM standard

Ecler HAK/NUO/EVM standard

Gemini UMX Series

KAM KPM2000DSP

Korg Zero4, Zero8

Numark 5000Fx

Numark DXM-01USB,-06,-09, PRO

Numark PPD-9000, PPD01

Numark SM-1

Numark DXM-PRO

Numark IDJ2, NS7

Omnitronic EX-840

Pioneer DJM-800

Rane Empath

Reloop Cut Pro

Rodec Scratchbox

Stanton SA-3

Stanton SA-5

Stanton SA-5

Stanton SK-1F, -2F, -4F, -6F

Stanton SMX-401

Tascam XS-8

Urei 1601

Vestax PMC-05,06,07,37

Vestax PMC-05,06

Vestax PMC-07, older PMC-05

Vestax PMC-08

Vestax QFO