The TTM 57SL combines the best Rane and Serato have to offer in a single, high performance mixer. Finally a mixer that fully integrates mixer hardware, software and software controls in one powerful package. The TTM 57SL combines all the performance and features of the Rane TTM 56 with Serato Scratch LIVE software. We didn't stop there -- we also included internal effects with six stereo insert points.

Two Input Buses
PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
All analog inputs are phono or line capable
Input Gain and Left/Right Pan controls
3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
Main Out on XLR (balanced)
Booth Out on 1/4" TRS (balanced)
Auxiliary Out on RCA (unbalanced)
Assign Program 1, Program 2 or Both to external FlexFx loop
Internal LFO Filter and Echo Effects with six possible insert points
Pre- or Post-channel faders for Program 1 and Program 2
Main Mix
Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
16 bit / 44.1 kHz Streaming Audio
Four channels from computer
Stereo source Digital 1 and Digital 2
Four channels to computer
Stereo Record 1 and Record 2
Stereo Recording
Record 1 and Record 2 may record:
Pre- or Post-channel faders for Program 1 or Program 2
Main Mix
Auxiliary Input Bus
Vinyl / CD Control Inputs
Stereo Record 1 may be used for 4-channels of control
Select Analog 1 or Analog 2 for Control Input 1
Select Analog 3 or Analog 4 for Control Input 2
Additional "soft" mixer controls used by Scratch LIVE & internal effects
Foot switch input (Inputs on Tip and Ring; foot switch not included)
Deck 1-2 switch
Group switch
B1 - B6 programmable switches
P1 - P2 programmable Encoders with push switches
J1 - J2 programmable Joysticks with push switches
USB firmware updates
Internal universal switching power supply (100-230 VAC)
Unit size: 13.5"H x 10"W x 4"D (34.3 cm x 25.4 cm x 10.2 cm)

Weight: 8.5 lb (3.8 kg)

Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 cm x 32.5 cm x 49 cm)

Weight: 12 lb (5.5 kg)