£ 325.00 inc. VAT
£ 640.00 inc. VAT
The JBL JRX125 is a dual 15" speaker systems have become one of the most popular configurations with DJs and musicians who are looking for more low-frequency performance while maintaining the simplicity of a single-box system. The JRX125 is actually a "quasi three-way" design. This means that the upper woofer covers lows and mids. The bottom woofer uses a lower crossover frequency and covers only lows, acting as a built-in subwoofer. So you get the extra low-end of a dual 15" rig while maintaining the superior mid-frequency performance of a single driver system.
Progressive TransitionTM WaveguideJust one example of JBL's innovation is the PTTM Waveguide design. For decades, horn designers were faced with trade-offs between well controlled coverage, low distortion, and good frequency response. JBL developed proprietary algorithms which give our PT Waveguides the best performance in all three areas.
HardwareJRX100 doesn't scrimp on the hardware either. All the JRX models use tough, non-resonant all-steel handles with big, beefy bars. And the entire baffle (not just the woofer) is protected by an 18 gauge steel grille.
JBL DriversAll woofers and compression drivers used in JRX100 are manufactured in Northridge, California by JBL Professional.
Enclosure ConstructionCompetitive systems typically use particle board construction and rely entirely on glue to hold it together. For JRX100, we selected a more rugged and acoustically superior 3/4" MDF material for the enclosures. And to make sure they stay together, we constructed them with advanced adhesives and closely spaced mechanical fasteners. Not only are the cabinets rugged, but the denser enclosure walls are more riged, delivering better low end as a result
SonicGuardTMFeedback, dropped microphones, pushing the amps into clipping - all these things can quickly destroy even the best high-frequency drivers. That's why JBL JRX100 speakers include SonicGuardTM protection. SonicGuard circuitry absorbs excess energy without interrupting the performance. No circuit breakers to reset, no fuses to replace and no "poly-switches" to degrade sound quality.
Frequency Range (-10 dB): 36 Hz - 16 kHz
Frequency Response (±3 dB): 45 Hz - 12 kHz
Sensitivity (1w/1m): 100 dB SPL
Nominal Impedance: 4 ohms
* Power Capacity: 500 watts
* Peak Power Capacity: 2000 watts
Recommended Amplifier Power: 500 watts to 1000 watts into 4 ohms
Maximum SPL: 133 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 2 kHz
Dimensions (H x W x D): 1099 mm x 464 mm x 432 mm
(43.25 in x 18.25 in x 17 in)
Weight: 42.6 kg (94 lbs)
High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive TransitionTMWaveguide
Low Frequency Driver: JBL M115-8A x 2
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel
The W-Audio DA1300 professional power amplifier is designed to achiev[ ... ]
View more details on W-Audio DA1300 ›
The XLS Series of power amplifiers from Crown represents a new era in[ ... ]
View more details on Crown XLS1500 Drivecore ›
Add Crown XLS1500 Drivecore to basket ›
View more details on Crown XLS2000 Drivecore ›
Add Crown XLS2000 Drivecore to basket ›
View more details on Crown XLS2500 Drivecore ›
Add Crown XLS2500 Drivecore to basket ›
Your basket is empty.